Development of a test bench for characterizing the air-to-air heat pump of an electric vehicle

This paper reports the experimental characterization of an air-to-air heat pump used in a B-segment electric vehicle, operating with R1234yf. The system consists of three heat exchangers (one outdoor and two integrated in the HVAC unit), a scroll compressor, valves, and an accumulator. This three-heat-exchanger architecture provides cabin cooling, heating, and dehumidification while avoiding refrigerant-flow reversal. The first part of the paper describes the design and commissioning of a dedicated experimental test bench conceived both as a didactic platform and as a research-oriented experimental facility for electric vehicle thermal management. Developed within a project-based learning framework, the bench was designed, assembled, and instrumented by Master’s students in energy engineering. The heat pump components supplied by the vehicle manufacturer are presented, together with the operating modes, instrumentation layout, and measurement strategy. The second part presents experimental results obtained in cooling and heating modes over a wide range of compressor speeds and outdoor temperatures. The coefficient of performance is shown to strongly depend on temperature lift, decreasing from about 5 to 1.3 in cooling mode and from 3 to 1.8 in heating mode. Compressor isentropic and volumetric efficiencies are experimentally evaluated as functions of pressure ratio and pressure difference. The present study focuses on cabin thermal management; battery cooling is not implemented on the current bench configuration and is identified as a perspective for future work. A detailed uncertainty analysis confirms the robustness of the observed trends, despite higher uncertainties at low compressor speeds.

Download

Publication type Conf Proceedings Paper

Publication date 26 May 2026

Authors Marie Peeters, Elise Neven, Vincent Lemort, Samuel Gendebien

Keywords Heat pump; Electric vehicle; HVAC; Experimental characterization; Thermal management; Test bench

Order nr HPT_337_560

Download