A new concept of industrial multi-energy systems with a multistage R718 high temperature heat pump

To reach global climate change targets, new concepts for industrial energy systems are needed. Hightemperature heat pumps (HTHPs) for process heat electrification are a promising and efficient waste heat recovery and process heat generation technology. However, the limits of the achievable temperature, the need for a high COP, the temporal mismatch between waste heat availability and process heat demand and between electricity demand and renewable electricity generation, and the limited capacity of the electricity grid are challenges that delay broad industrial adoption of HTHPs. This paper proposes a new industrial multi-energy system (MES) with a multi-temperature multi-stage R718 HTHP systematically integrated with thermal energy storage (TES) and photovoltaics (PV). The methodology consists of two stages. Firstly, high energy efficiency and delivered temperature for the industrial MES are ensured at the component level. For this, single-stage centrifugal MVC heat pumps with direct flash evaporation and condensation are arranged in cascade between TES tanks, upgrading the waste heat to provide multi-temperature process heat. Secondly, high operational flexibility of the industrial MES is demonstrated at the system level through an illustrative case of a dairy plant where specific process heat demands (hot water and steam) are given. Accordingly, an appropriate R718 MVC HTHP is designed. A dynamic model for HTHP optimization is developed using thermodynamic relations with CoolProp interface and regression modeling. Using time profiles of the process heat demands and the PV generation as inputs, the model is used to optimize system operation with the goal to minimize the stress on the electricity grid. The results show that a high COP of above 3 (25-35 % higher than conventional closed-cycle HTHP) can be reached with the proposed new HTHP, together with a high share of local renewable electricity to power the HTHP, reduced grid stress, and improved flexibility of the integrated system.

Download

Publication type Conf Proceedings Paper

Publication date 26 May 2026

Authors Maja Sharevska, Monika Sharevska, Gerrit Brem, Gerwin Hoogsteen, Johann Hurink, Artur Pozarlik, Yashar Hajimolana

Keywords R718 multi-stage high temperature heat pump; Flash evaporation and condensation; Regression model; Operational optimization; Multi-energy system; Operational flexibility

Order nr HPT_157_422

Download