P.4.3.9 Resorption Heat Transformers Operating with the Ammonia-Lithium Nitrate Mixture

Absorption heat transformers (AHT) are interesting devices for recovering and upgrading thermal energy which consume very low amount of primary energy. To date, H2O-LiBr is the most common working pair used in absorption heat transformers. However, H2O-LiB mixture has several well-known drawbacks. On the other hand, heat transformers operating with NH3-H2O are not so common because they should operate at very high pressures. The use of a resorption circuit in heat transformers is an interesting alternative to reduce the high pressure level. A resorption heat transformer (RHT) is very similar to an absorption heat transformer, where the evaporator-condenser circuit is replaced by a second desorber-absorber circuit. In the literature it has been reported very few studies about resorption heat transformers operating with the NH3-H2O working pair. In this paper, the modeling and thermodynamic analysis of a single stage absorption heat transformer (AHT) and a single stage resorption heat transformer (RHT) operating with the NH3-LiNO3 mixture is presented. The systems using the NH3-LiNO3 do not require rectification process; therefore the systems using this mixture are simpler than those operating with NH3-H2O. In the present study the coefficients of performance, the exergetic efficiencies and the gross temperature lifts are analyzed as function of the main operating system temperatures.

Download

Publication type Conf Proceedings Paper

Publication date 18 May 2017

Authors J. A. Hernández-Magallanes, W. Rivera, A. Coronas

Keywords Absorption Heat Transformer; Resorption Heat transformers; Ammonia-Lithium Nitrate.

Order nr -

Download