Annex
56
Start date:
End date:
Internet of Things for Heat Pumps
The Annex description: The IoT Annex focusses on the opportunities and challenges of IoT enabled heat pumps. Connected devices will play a major role in the future addres…
Ongoing Annexes
HPT TCP has been active since 1978, with a lot of collaborative research, development, demonstration and deployment projects. We call these projects "Annexes" and they are conducted on a combination of cost sharing and task-sharing basis by the participating countries. Here you can read about the Annexes that are running right now.
Annex
55
Start date:
End date:
Comfort and Climate Box
– Speeding up market development for integrating heat pumps and storage packages Annex 55 aims to accelerate market development of Climate and Comfort box soluti…
Annex
54
Start date:
End date:
Heat pump systems with low GWP refrigerants
This annex aims at promoting low GWP refrigerant application to accelerate phase down of high-GWP HFCs by developing design guidelines of optimized heat pump components a…
Annex
53
Start date:
End date:
Advanced Cooling/Refrigeration Technologies Development
Growing populations and improving economies world-wide, especially in the developing world, are projected to lead to huge increases in global demand for space cooling, de…
Annex
52
Start date:
End date:
Long term performance measurement of GSHP Systems serving commercial, institutional and multi-family buildings
Measured long-term performance data for ground source heat pump systems serving commercial, institutional and multi-family buildings are rarely reported in the literature…
Annex
51
Start date:
End date:
Acoustic Signature of Heat Pumps
Reduction of acoustic emissions is important to further increase the acceptance of heat pumps as air-to-water, water-to-air, air-to-air and brine-to-water (ground source)…
Annex
50
Start date:
End date:
Heat Pumps in Multi-Family Buildings for space heating and DHW
The overall aim of this Annex is to increase the use of heat pumps in multi-family buildings. The main objectives is therefore to demonstrate possible energy savings and …